CRY2623 Industrial Acoustic Imager (Superior Version)
CRY2623 Industrial Acoustic Imager (Superior Version)
  • CRY2623 Industrial Acoustic Imager (Superior Version)
  • CRY2623 Industrial Acoustic Imager (Superior Version)
  • CRY2623 Industrial Acoustic Imager (Superior Version)

CRY2623 Industrial Acoustic Imager (Superior Version)

CRY2623 is a hand-held industrial acoustics imager that supports ultrasonic frequency band.The instrument uses the microphone array beamforming technology to acquire the sound source distribution data, and collects the video images in real time with the high-definition camera. By integrating the sound source distribution data with the video image, the changing sound source is dynamically presented on the display screen.

CRY2623 Industrial Acoustic Imager helps you quickly detect possible air, gas and vacuum leakage faults in noisy industrial environments.An electrical device with a partial discharge fault is found in the power system.The industrial acoustics imager is made of aluminum alloy shell, which is strong and durable and can adapt to the complex and changeable working environment.

CRY2623 is especially for our overseas customers with English/Korean/French user interface. It features both Partial Discharge and Gas Leakage detection function,and can show partial discharge type, estimation of gas leakage and loss value.

Download
Features
Features

Features

  • The equipment is simple and convenient to operate, and can be used quickly. It only needs to adjust two parameters, the test frequency range and test dynamic range to meet the vast majority of test requirements.

  • Support camera mode, video mode,and the data recording on the job site is flexible.

  • Large capacity TF data memory card can be expanded also test results can be exported and reported quickly.

  • Support leak assessment function to evaluate the leak level and leak volume.

  • It features PC-based Report Generation Software, just one click to export test reports.

  • Support ultrasonic monitoring.

  • High efficiency, instant imaging, rapid positioning of fault points in the screen.

PD Detection & PD Type Identification

Partial discharges can be detected before more serious faults occur, even before a thermal camera detects them.

PD Detection & PD Type Identification
PD Detection & PD Type Identification

PD Detection & PD Type Identification

Partial discharges can be detected before more serious faults occur, even before a thermal camera detects them.

Gas Leakage Detection

Gas Leakage Detection

When a leak or vacuum leak occurs in any pressurized gas, turbulence is created by the gas flow, and the turbulence emits acoustic energy, which covers the audible domain and the ultrasonic frequency band.In the general environment, noisy ambient noise can very easily mask the acoustic signal in the audible domain.So through the CRY2623 imager to detect the possible ultrasonic frequency band sound source in the environment, you can quickly locate the location of the gas leakage.

Airtightness Test

Most of the existing equipment airtightness testing programs are based on pressure-holding, water immersion and soap water, they are extremely inefficient.Acoustic imaging gas tightness test method, using the ultrasonic microphone and acoustic imager combination, the ultrasonic microphone is placed in the object to be tested. If there is a leak, its internal ultrasonic source emitted through the leak hole to the outside and thus accurately captured by the acoustic imager.This method is very efficient and does not cause damage to the object to be measured.

Airtightness Test
Airtightness Test

Airtightness Test

Most of the existing equipment airtightness testing programs are based on pressure-holding, water immersion and soap water, they are extremely inefficient.Acoustic imaging gas tightness test method, using the ultrasonic microphone and acoustic imager combination, the ultrasonic microphone is placed in the object to be tested. If there is a leak, its internal ultrasonic source emitted through the leak hole to the outside and thus accurately captured by the acoustic imager.This method is very efficient and does not cause damage to the object to be measured.

Abnormal Noise Locating

Abnormal Noise Locating

CRY2623 acoustic imager can help you quickly locate defects such as: valve rattling, abnormal structural vibration and other noise type of fault, to help you better monitor the status of equipment and control product quality.

Technical specification
Acoustic Specification
Microphone array128-channel MEMS microphone
Effective test bandwidth2kHz-48kHz
Dynamic range0.5dB-12dB user adjustable
Test Sound Pressure Level Range25.7dBA-132.5dBA
Auto max/min dB gain

User-settable, minimum test bandwidth 1kHz

Number of digits24bit
Sound image FOV62°
Sound image frame rate
At least 25 FPS
Leak detection rate

10m 5bar 0.92ml/s

0.5m 5bar 0.55ml/s

Detect distances

0.3m-120m

Camera
Camera FOV62°
Camera focal length
3.04mm fixed focal length
Camera pixel8 million pixel
Display
Resolution1024*600(614,400 pixels)
Size7 inch
TouchscreenCapacitive touch screen
BrightnessAdjustable
Photo notesUp to 5 photos notes for reference
SourceShow single or multiple sources
Standard palettesGrayscale, Ironbow, Blue-red
Playback functionView photos, videos anytime, and add notes or tags
Storage
Internal StorageAbout 8G
External StorageTF memory card, at least 64G, expandable to 256G
Data storage formatjpg (Picture), mp4(Video), wav(Audio)
Video length
5 minutes
Digital exportTF card
Power
Battery Capacity

1X6600mAH@7.2V rechargeable battery

1Xexternal battery package, continuous

Battery Life 4_6 hours operation time
Charger 

USB Type-C port

USB PD protocal supported, 15W

Power consumption

15W for battery charge

29W for maxium power

consumption

Energy managmentSleep/Auto power off modes

Interface
USB3.0 Type-C USB host port
3.5mm headphone socket
Operating Environment
Operating environment-20℃~+50℃ 10%-95% no condensation
Storage temperature-20℃~+60℃
Charging temperature10℃~+45℃
General Specification
Ingress Protection (IP)IP54
Size272mm x 174mm x 42mm
Weight1.7kg
Warranty2 years
Self-diagnostic notificationArray-health test function to identify when microphone array needs attention
SystemLinux system
CertificationCE, FCC, RoHS-compliant, MSDS, CNEX


Supported Language
English, French, Chinese, German, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Russian, Spanish, Swedish


Software
Report types

Gas/Electricity, ISO 50001-compliant

Analysis

Waveform, Spectrum, Spectrogram, leakage assessment, discharge type discrimination


More products
CRY2620 Industrial Acoustic Imager (Basic Version)
CRY2620 Industrial Acoustic Imager (Basic Version)
More
CRY2624 Industrial Acoustic Imager (ATEX Version)
CRY2624 Industrial Acoustic Imager (ATEX Version)
More
CRY2623M Fixed Acoustic Imager
CRY2623M Fixed Acoustic Imager
More
CRY2626G UAV Acoustic Imager
CRY2626G UAV Acoustic Imager
More
Related resources
After-sales services
  • 20 years industry experience

  • 24 hours Technical Support

  • Professional engineers on line response

  • 2 hours response
    Solution within 2 work days

  • All life Costs Maintenance

Activity Registration
If you need to ask the price of CRYSOUND acoustic imager, reserve the free test for a limited time.Please input information and requirements according to the form, and we will arrange engineers to contact you as soon as possible.
*
*
*
*
*
Please select your requirements (pops)*
Consulting the price
Appointment Demo